Sanitaire SC435A, Owner'S Manual

Page: 4 / 7

4
2 Preparing the Machine
• Remove the machine from the box.
• Check that all the parts are in good condition.
• Assemble the handle in the upright position by attaching it
to the brackets above the rear wheels. Tighten with the two
thumbscrews. (Fig. 1)
Fig 1
• To install the side brushes, apply light pressure, twisting
the brushes upwards on the snap device until you feel them
lock into place. (Fig 2)
Fig 2
• Height adjustment of the main brush is achieved by rotat
-
ing the knob located on each side of the machine (Fig. 3)
Fig 3
• To adjust the side brushes, turn the adjustment knob
above the brush to raise or lower the brushes. (Fig. 4)
Fig 4
3 Operation
3.1 Using the machine
• To use the Sanitaire 32” sweeper, simply push it at a nor
-
mal walking speed.
• When the machine is pulled backwards, the side brushes
and main brush automatically lift slightly from the floor. This
prevents the creation of unnecessary dust. The brushes are
all automatically lowered to the pre-selected working position
when the sweeper is moved in a forward motion.
4 When Cleaning is Finished
4.1 Emptying the machine
• To empty the dirt collector, simply lift out and empty into a
suitable waste disposal bin.
4.2 Storage
• Adjust the side brushes upwards after use to protect the
bristles during storage. (Fig. 4)
• To store the Sanitaire 32” sweeper in the upright position,
loosen the thumbscrews slightly and fold handle bar down.
The handle can now be folded down either to the front or to
the rear. Park in an upright position with the wheels towards
the wall. (Fig. 6)
Fig 6
4.3 Maintenance
• The Sanitaire 32” sweeper is designed to be maintenance
free. All bearings are dust proof and all parts are weath-
erproof. To clean the machine wipe off with a dry or damp
cloth. It is not recommended to clean the machine with a
pressure washer.