Helpful Information:
Listen
to your cleaner. If you notice a change in the sound of the motor or a change in performance, it could simply indicate
a common usage or maintenance issue such as, possible blockage in hose, dirty filter or full dust bag. These are all easy
to fix and the instructions are included in this owner’s guide. Becoming familiar with the information in this guide will help
you to get the best possible performance from your new cleaner for many years to come.
4
Electrical Cord -
For shipping purposes, the electrical
cord is stored inside the tool box . Open lid latches, lift tool
tray up, to remove electrical cord.
LiftTool Tray
ON/OFF Switch
.
International symbol
I
means On,
International symbol
O
means Off.
ON/OFF
Switch
HOW TO USE
(continued)
Plug round end of electrical cord into the tool box, as shown
above. Plug the other end of electrical cord into electric
socket.
The electrical plug has been designed so an electric tool or
appliance can be plugged directly into it.
Cover unused receptacle when not in use with outlet cover
(attached to cord as shown).
Outlet
Cover
Extension Cords
NOTE: If an extension cord is used, make sure the plug
connection does not come into contact with any
liquid.
Use a grounded extension cord with 3-prong
plug and 3-pole receptacle; 16 gauge, SJTW type.
Loop the cords to prevent unplugging. Suitable for
outdoor use.
Suction Inlet
.
Insert larger end of hose into suction
inlet to use as a vacuum.
Suction
Inlet
1. To use accessories remove
hose from top of the lid by
lifting up.
2. Place desired accessory onto
end of hose or crevice wand.
Accessories -
The accessories are stored on the inside
of the tool box lid. There are diagrams on the inside of the lid
to help with placing them back in the correct location.
Dusting/Upholstery Brush
is for furniture, blinds,
books, lamp shades, shelves, curtains, draperies, cushions
and fabrics.
Crevice Wand
cleans corners, stairs, baseboards, and
between cushions.
Floor Tool
cleans bare floor surfaces.
Dusting/
Upholstery
Brush
Crevice
Wand
Hose or
Wand
Blower Port
.
Insert larger end of hose into the blower port
to use as a blower.
NOTE: Always wear safety goggles
(not provided). Never point
blower toward people,
animals or objects that may
be injured/damaged by
flying debris. These units
must NOT be used to power
a paint sprayer or to supply
air to any other sprayer.
Blower Port
Floor Tool
