62
//63
Temporary off function:
This function is ideal to perform any kind of activity in front of the sensor without
operating the system (for example, cleaning).
The flush valve will remain shut for 1 minute when this button is pressed once.
To cancel this function and to return to normal operation press the On/Off
button again or wait 1 minute.
Reset button:
This function restores all the factory settings except for the sensor range. If
required, press the Reset button and without releasing it, press the
(+) button once.
Note: To enter the self adjusting mode, use the ADJ button. To change the sensor
range, use the RANGE button.
Cuidados y limpieza de acabados cromo y especiales
DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or
the like.
Use of any prohibited cleaning or maintenance products or substances could
damage the surface of the flush valve.
For surface cleaning use ONLY soap and water, then wipe dry with clean cloth
or towel.
When cleaning bathroom tile, the flush valve should be protected from any
splattering of harsh cleansers.
If system chemical disinfection is practiced, chlorine can be used (calculated
chlorine concentration of 50mg/l maximum in water per one hour dwell time) at
service interval frequency.
//
MAINTENANCE
//
SETTINGS ADJUSTMENT
