Sanijet PIPELESS SSB2-S115-XX Owner'S Manual Download Page 5

2

Limited Commercial Warranty

PEDICURE EQUIPMENT LIMITED COMMERCIAL WARRANTY

PRODUCTS COVERED:

 Pedicure Sinks, Reflexology Foot Baths and Portable Foot Baths, manufactured by SANIJET and put to 

commercial use.

PERSONS COVERED:

 The original purchaser for commercial use (Customer).

WARRANTY PERIOD:

 One (1) year on all parts and components beginning on the date of original purchase for use or two (2) 

months after the product leaves SANIJET’s facility, whichever comes first. SANIJET may require Customer to document the date 
of original purchase and provide serial number(s) of the product(s).

SCOPE OF COVERAGE:

 This warranty only covers problems reported to SANIJET during the warranty period. Coverage is 

SUBJECT TO the exclusions below. If a tub shell manifests a defect or fails to properly perform under ordinary use within 
the warranty period, SANIJET will repair or replace it at SANIJET’s election, but shall have no responsibility with respect to 
removal, reinstallation or transport of the tub shell. If any other part or component manifests a defect or fails to properly 
perform under ordinary use during the warranty period, SANIJET will provide repair or replacement parts or components at its 
election. As a condition to warranty service, SANIJET may require Customer to return defective/malfunctioning parts and may 
charge Customer for the repair or replacement parts or components subject to a full refund upon receipt of the return parts 
and verification of the problem. THE REMEDY PROVIDED IN THIS SECTION IS CUSTOMER’S EXCLUSIVE REMEDY FOR ANY DEFECT OR 
MALFUNCTION OF THE PRODUCT.

SHIPPING:

 SANIJET will pay freight on a least-cost basis to ship repair/replacement parts to destinations within the continental 

United States.

EXCLUSIONS:

 This warranty does NOT cover a) metallic plated hardware, light bulbs or fading from exposure to direct sunlight; 

b) failure, damage or defect caused by any of the following after the product leaves SANIJET’s factory: mishandling, abuse, 
misuse, neglect, accident or natural disaster, normal wear and use that does not affect the product’s function; failure to 
maintain the product as recommended by SANIJET (See Owner’s/Installation manual); or c) any part that has been altered or 
tampered with, including but not limited to alteration or tampering with any labeling.

MAKING CLAIMS:

 Report problems to SANIJET’s customer service department.

Telephone: 877-934-0477 or 972-745-2283    Fax: 214-352-0348    E-mail: [email protected]

DEALER WARRANTIES:

 No dealer or distributor has any authority to bind SANIJET to any other warranty or any change or 

addition to this warranty.

SOLE REMEDY / LIMITATION OF DAMAGES: THE REMEDY PROVIDED ABOVE UNDER “SCOPE OF COVERAGE” IS CUSTOMER’S EXCLUSIVE 
REMEDY FOR ANY DEFECT OR MALFUNCTION OF THE PRODUCT. To the fullest extent allowed by law, SANIJET disclaims and 
excludes liability for consequential and incidental damages including, but not limited to, loss of use, lost rentals, lost profits, 
loss of business reputation, out of pocket expenses, damage to property other than the warranted product, mental anguish and 
punitive damages. 

Some states limit or do not allow the exclusion or limitation of incidental or consequential damages, 

so some or all of these limitations may not apply to you.

STATE LAW RIGHTS: 

This warranty gives you specific legal rights, and you may also have other rights which vary from 

state to state.

 THE DURATION OF ANY IMPLIED WARRANTIES UNDER STATE LAW, INCLUDING THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE WARRANTY PERIOD DESCRIBED ABOVE. 

Some 

states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you.

Summary of Contents for PIPELESS SSB2-S115-XX

















Reviews: