6
HOW TO USE
1.
Fill the unit with water at the desired temperature above the jets to the water level
indicator. A fill hose with a connector to attach to a typical sink spout is included or the
unit can be filled with the use of a container.
2.
Move the unit to the place where it will be used and be sure that it is on a level, solid
floor. Note: The front two casters have locking mechanisms to prevent the unit from
moving during use. Be sure the locking mechanisms are disengaged before attempting to
move the unit. A handle is built into the top of the unit for easy maneuverability. Before
moving the unit filled with water, place the two removable lids on the tank to prevent
water from splashing onto the floor. (
See Illustration #1
.)
Illustration #1
3.
Plug the unit into a grounded electrical outlet.
4.
To activate or deactivate this appliance, press the ON/OFF button.
5.
Bath additives (including oil based products) can be used in a SANIJET Pipeless Foot
Bath, since their residue can be easily cleaned. CAUTION: Use only low foaming
additives.
6.
You should always be in a seated position when putting your feet in or removing them
from the foot bath. WARNING: NEVER STAND IN THE FOOT BATH.
7.
During use of the foot bath the front lid can be used as a foot rest as well as assist in
maintaining water temperature and reduce splashing.
