CMOS Battery Install System 60 and 100
The following steps will guide you through the replacement/install of the internal CMOS battery of your System 60 or System 100 Sangoma
appliance
Battery Type
The CMOS battery is a CR2032 3V battery. This is a very common watch battery.
Replacement Procedure
Verify that the appliance is powered off.
Unplug the power from the rear of the unit.
Unscrew the 2 thumb screws on the back of the unit.
Remove the cover by sliding the top cover back about 1 inch (2.5 cm). Lift up the lid to remove.
In the front of the unit, you will see the battery location.
