F) Insert the card into an open PCI or PCIe slot in server.
Fasten PCI bracket to chassis.
Server
PCI/PCIe Slots
Technical specifications available at WIKI.SANGOMA.COM
Attach additional Remora card(s) using a backplane
It is ideal to put the Remora(s) to the right of the main card, so that the main card always
contains port 1. However, if space is a concern, either side is appropriate.
The lowest number port on the backplane corresponds to port number 1 in the stack.
(e.g., JP6 on a 4-connector backplane.)
*
If using one or more Remora daughter cards, you must attach a Molex Power
Connector from your computer’s power supply unit to the A500 main card (the socket is
located at the rear on the right end of the card below the backplane).
** If you plan to use BRI phones, you must also connect a standard power supply to the
Power Feeder on the corresponding Remora card(s).
OPTIONAL – INSTALL UP TO 3 REMORA™ EXPANSION CARDS
Recommended Configuration Only
O
N
1
2
O
N
1
2
O
N
1
2
O
N
1
2
O
N
1
2
O
N
1
2
TE MODE
NT MODE
TE MODE
O
N
1
2
O
N
1
2
O
N
1
2
O
N
1
2
O
N
1
2
O
N
1
2
TE MODE
NT MODE
TE MODE
Backplane
Install up to 3
additional Remora™
expansion cards
(24 BRI ports in total)
Main Card
Power Feeder
for NT mode**
Visit
wiki.sangoma.com
for the latest drivers and instructions.
You're done! Enjoy your new card.
3. INSTALL THE DRIVERS (WANPIPE
®
CD)
