D) Insert the card into an open PCI or PCIe slot in server.
Fasten PCI bracket to chassis.
Server
PCI/PCIe Slots
Technical specifications available at WIKI.SANGOMA.COM
Visit
wiki.sangoma.com
for the latest drivers and instructions.
You're done! Enjoy your new card.
3. INSTALL THE DRIVERS (WANPIPE
®
CD)
Your A400 Card is fax synchronization ready.
Fax machines, connected to a PBX using PRI or BRI connection, run inconsistently at best,
simply because the analog interface supporting the fax machine is not synchronized to the
PSTN timing. Lack of a properly synchronized connection can result in faxes that are distorted,
missing lines and even fail outright.
To synchronize your new A400 to your digital card (A100-series or A500) simply connect the
jumper pins
†
on both cards via a two-wire jumper cable (each sold separately).
The digital card must have a hardware echo canceller installed.
The minimum firmware that supports clock synchronization for the A400 is v10.
For more information, please go to
wiki.sangoma.com/t1e1analogfaxing
SYNCHRONIZE FOR FAX
(PATENT PENDING)
FXO-2
FXO-2
FXO-2
Jumper Cable
Red edge is at the top
Digital Card
A400 Card
