Quick Start Guide
Sangfor.co.uk | Creating an acceleration tunnel
8
The remaining settings can be left at their default values, click on
OK
to save the tunnel.
You can check the condition of the acceleration tunnel by clicking on the
Status
button across the
top of the window and selecting
WAN Optimization
from the drop down menu. After the real time
stats interface has loaded click, on
the Acceleration Connections
tab to see a table listing the
acceleration tunnels currently active.
If the WANO unit is not accelerating any traffic even when an acceleration tunnel is active, the usual
cause is an incorrect cable type between the unit and the firewall/router or switch. Please check
your cables and correct any mistakes.
