![Sangean TOUGHBOX User Manual Download Page 10](http://html2.mh-extra.com/html/sangean/toughbox/toughbox_user-manual_4005589010.webp)
9
Setting tuning step
Tuning step on some countries are different from where you pur-
chase the radio.
1. When the radio is switched off, press and hold BAND button 3
seconds until software version 'FXX' shown on the display. Rotate
the tuning control rotary to highlight the desired frequency range,
as the following:
F00: 76 MHz - 90 MHz
F01: 76 MHz - 108 MHz
F02: 87.5 MHz - 108 MHz
F03: 64 MHz - 108 MHz
Press BAND button to confirm the selection.
2. Then rotate the Tuning control rotary to select 50 kHz or 00 kHz
FM step. Press Band button to confirm the selection.
3. Rotate the Tuning control rotary to select 9 kHz or 0 kHz AM step.
Press Band button to confirm the setting. Then the tuning step
setting is completed.
Clear the preset stations
Whenever is necessary, you can clear all the preset stations.
When radio is off, press Preset Button 5 same time for more than 2
seconds to clear all the preset stations. Radio will be reset to origi-
nal factory set status.
Summary of Contents for TOUGHBOX
Page 1: ...Version 1 GB TOUGHBOX...
Page 4: ...AUX...