TUNING KNOB
Turn the tuning knob
slowly to select the desired station.
Adjust the volume knob by rotating it clockwise for a
comfortable listening level.
Whenever th AM or FM frequency is tune in, the dial pointer
will correspond to the dial scale on the front of the radio.
this switch selects the AM broadcast band or the FM
broadcast band as indicated. While receiving FM broadcasting,
set the switch to FM STEREO at normal time, if the signal
becomes weak and distorted, you may select MONO mode
by switching to FM position.
Power Supply: : 1xAAA(UM-4)battery
Frequency : AM 530-1710kHz
FM 87.5-108.0MHz
Semiconductors : 3 Integrated Circuits 3 Diodes
Output Power : 0.5mW
Earphone jack : 3.5 32ohm (STEREO)
Design and specifications are subject to
change without prior notice.
4
VOLUME KNOB
1
DIAL POINTER
6
AM/FM/FM STEREO BAND SELECTOR
5
SPECIFICATIONS
3
Summary of Contents for SR-2 - MANUAL 2
Page 1: ...SR 2 User Manual...
