6
E
．
Sleep timer automatically shuts off radio on the selected sleep time (up to 6
hours).
．
A built-in timer with beeper alarm can be set for short-term or a maximum of up
to 6 hours.
．
Dual alarms work through the RS-330 and the RS-332 independently.
．
“Ramp-up” alarm raises volume level slowly, over a 10-second period.
．
Distinctive beepers for Alarm 1 and Alarm 2.
．
Snooze control for an extra five minutes of sleep.
．
Built-in one-hour super capacitor backup system keeps clock and alarm
settings as well as station presets in the event of a power failure.
OPERATING INSTRUCTIONS
UNPACKING AND SETTING UP
This manual covers installation and operation of the RS-330 Digital FM/AM Stereo
Clock Radio. The optional RS-332 High-Fidelity Clock Radio Stereo Speaker is
required for stereo listening (although you can listen through stereo headphones
with the RS-330 by itself).
After unpacking the RS-330, plug its power cord into an appropriate AC power
outlet. 120 volt AC power is standard throughout most of North America. Voltage
varies in other parts of the world. The RS-330 may emit a “thump” when first
plugged in; this is normal.
There is an FM MODE switch next to the control cable jack on the back panel.
If you are using the RS-332 High-Fidelity Clock Radio Stereo Speaker, set this
switch to STEREO to hear stereo broadcasts. If you are listening to the RS-330
by itself, set this switch to MONO.
THE DISPLAY
The fluorescent display shows the current time, station frequency, alarm settings,
and operational modes.
A light sensor at the base of the display automatically adjusts the display’s
brightness to compensate for changes in room lighting. You can modify the
automatic setting with the recessed knob on the bottom of the RS-330. Turn
this knob clockwise to make the display brighter, counter-clockwise to make it
dimmer.
30
24
32
RS-330_381B101A.p65
2003/6/18, 下午 02:24
Page 6
Adobe PageMaker 6.5C/Win
