Sangean RCR-4, Instruction Manual

Page: 10 / 24

9
Operation
Power on
Connect the plug to a wall socket, then the clock shows 00:00.
And the display shows “Clock not set”.
Set TIME ZONE switch (on the bottom of the radio) to 0 position
for regular case.
Clock setting
Clock Auto Setting
1. Switch on the DCF switch on the bottom of the radio to On in the
area where provide the Radio Controlled Time service.
2. The clock time will automatically set up. Auto time set up takes
about 15 minutes.
3. When Clock Auto Setting is operating, the LCD shows the
signal strength.
When it is under “Clock not set”, the Clock Auto Setting
operates once an hour. When the clock is automatically set,
the Clock Auto Setting operates once every other hour.
Touch TIME/DATE key for more than 2 seconds to activate the
Clock Auto Setting (When DCF is on and under standby mode).
When it is under the Clock Auto Setting, touch the
TIME/DATE key for more than 2 seconds to deactivate it.