Sangean PR-D4W, Manual

Page: 14 / 22

3
GB
Setting the weather alert
There are three weather alert modes available. When the weather
alert mode is activated, you can listen to the AM/FM station or turn
the radio off without affecting you receiving an alert signal.
. Follow the steps above to tune to the required weather channel.
2. Press and hold the WX Alert button until the radio beeps to activate
the first weather alert mode. Now the alert symbol ( )
will show on the display. This is the weather alert with Alert light
only. When a weather related emergency is issued, weather alert
indicator will flash in red until any button is pressed.
3. Press and hold the WX Alert button again until it beeps to access
the second mode. Now the alert mode ( ) will show on
the display. In this mode, the alert indicator flashes red and the
siren sounds off when the NOAA alert tone is issued.
(Note: If you have headphones plugged in when an alert is issued,
the siren will sound through the speaker instead of the headphones)
4. Press and hold the WX Alert button until the radio beeps to activate
the third weather alert mode. Now the alert symbol ( )
will show on the display. In this mode, the red light flashes and
the radio switches to weather broadcasting automatically.
Note:
While the alert indicator flashes, pressing any button on the radio will
cancel the siren and turn the radio to the weather broadcast channel.