You may select to be awaken by your favorite radio station. Tune the
the desired station, press MEMO button , then STANDBY button
display will show STANDBY, before STANDBY disappears, press MEMO button
again to complete the setting and tum off the radio, display will
show current time and STANDBY ,if you like to see the alarm time, press
STANDBY button,display will show alarmed time and alarm station.
RADIO OPERATION
APS
(Automatic Programing System)
The set features an APS function,Its main advantage is the quick,
automatic programming of the station buttons for FM, LW and MW.
This is particularly advantage for the initial programming and when
travilling as all the transmitters with good reception quality
Turn on the radio, select desired radio band by pressing FW/MW/LW band
button .Then press APS button for more than 2 seconds, display
will show APS and starts with a signal tone. The frequency and the
memory slots 1-9 are then assigned with stations with good receiving
quality. After APS is completed, it will stop at the most strongest
station signal being found.
If more than 9 statons are received, the transmitters with the strongest
signals are the ones that are selected. If in the LW band for example
fewer than 9 stations are received, the memory slots will appear for
the stations numbers being memorized.
Tuning the station
The - buttons are used to tune in stations.
For an automatic station search, press the + ( ) or -( ) button
until the frequency display starts advancing on its own. Then release
the button.
The tuning function will stop automatically when a powerful signal from
a station is found. The search can be broken off by pressing the button
for the opposite direction.
Manual station tuning
If the transmission frequency of a desired station is known, manual
tuning is advisable.
Press the - buttons intermittently until the desired frequency
is reached.
11
12
15
17
18
5
Summary of Contents for PR-D1
Page 1: ......
