Sangean MMR-88, Operating Instructions Manual

Page: 10 / 70

9
Seek Tuning
Turn the radio on by pressing the Power button. Select the desired band
by pressing the BAND button.
Press and hold the Tuning UP/Down button for approx. /2 second, the
radio will seek for the next active station. Repeat as many times until the
desired station is found.
Manual tuning
Turn the radio on by pressing the Power button; select the desired band
by pressing the Band button.
Press Tuning Up/Down button repeatedly until the desired frequency is
found.
To Preset stations
.
2.
3.
4.
5.
Tuning the radio - using Seek Tuning, Manual Tuning
and Memory preset recall.
Turn the radio on and use seek tuning or manual tuning as described
above to tune to your desired station.
Press and hold the PRESET button for approx. 2 seconds until the
display blinks M (Memory) to enter the preset mode.
When the M (Memory) display blinks with the previous preset station
frequency, press the Tuning UP/Down button to select the desired
memory position as shown on the display.
Press the PRESET button again to complete the memory setting, the
display will appear with a P (preset) and the chosen preset position.
After the P and preset position disappear from the display, you may
then press the Tuning UP/Down button again to tune to next desired
station.
This radio features a total of 9 preset memories in random selection
for AM/FM.