Sangean HD Radio HDT-20 User Manual Download Page 6

5

Power your radio

1. Connect the power cable with the radio and plug it in to a live outlet.
2. Connect the FM Dipole Antenna into the FM antenna terminal.
3. Connect the AM loop antenna into AM antenna terminal.
4. Press the Standby/Power button to turn on the radio.

Note:

1. Use only the power cable/ FM Dipole antenna / AM loop antenna 

supplied with the radio. Connecting an incompatible power supply 
and antennas will cause permanent damage to the radio.

2. The AM loop antenna should be located at least 20”away from the 

tuner to avoid possible interference.

IMPORTANT: 

The mains plug is used as the means of connecting the radio to 
the mains supply. The mains socket used for the radio must remain 
accessible during normal use. In order to disconnect the radio from the 
mains completely, the mains plug should be removed from the mains 
outlet completely.

Setting the clock

Clock setting can be done when the receiver is on or in Standby Mode 
(power off).

Setting the clock manually

1. Repeatedly press the Menu button until ‘Clock Update’ is shown on 

the display.

2. Rotate the Tuning control knob to select ‘Manual’ and press the 

Tuning control knob to enter the clock time setting. The hour digit will 
be highlighted on the display.

3. Rotate the Tuning control knob to set the desired hour. Then press 

the Tuning control knob to confirm the setting. The minute digit will be 

highlighted on the display.

4. Rotate the Tuning control knob to set the desired minute and press 

the Tuning control knob to confirm the setting. Now the month digit 

will be highlighted on the display.

5. Follow the steps above to set the month/day/year setting. When the 

clock time setting is completed, your radio will exit the menu.

Auto clock set mode

 

1. Repeatedly press the Menu button until ‘Clock Update’ is shown on 

the display.

2. Rotate the Tuning control knob to select ‘Auto’ and press the Tuning 

control knob to confirm the setting. Your radio will synchronize its 
clock time whenever it tunes to a radio station using RDS with CT 
signals.

Summary of Contents for HD Radio HDT-20
















Reviews: