Sangean DT-200X, User Manual, Page: 6 / 9

7
Battery Installation
NOTE:
A flashing “E” appearing on the LCD display indicates a weak battery
and that replacement of batteries is required.
• Turn radio off.
• Prepare replacement batteries to ensure a quick and easy change.
Failure to change batteries within 1 minute will reset presets and clock
settings.
• The battery cover is located on the back of the unit. Apply a gentle
downward pressure and slide the door to the right side of the unit.
• Place 2 ‘AA’ batteries inside the unit oriented to the illustration located
just below the battery compartment.
Tuning the Radio
Seek Tuning
• Turn radio on using the On/Off button located on the top of the radio.
• Select desired band by pressing the “Band” selector on the front of the
unit.
• Press and hold the proper tuning button (Up/Down) for approximately
½ second. Radio will seek for next active signal station.
• Repeat as many times as desired.
Manual Step Tuning
• Turn radio on using the On/Off button located on the top of the radio.
• Select desired band by pressing the “Band” selector on the front of the
unit.
• Press the desired tuning button (Up/Down) repeatedly until desired
frequency is found.