background image

    AM    520-1710KHZ   Internal/Rotate radio for
                                            best reception

    FM     87.5-108MHZ 

  

External/Make sure Head-

                                            phones   are   inserted into 
                                            Headphone Jack

  

 

   

TV   

  

ch.2-13(VHF) 

  

External/Make sure Head-

                                            phones are inserted into
                                            Headphone Jack

T U N I N G  T H E  R A D I O

BAND  FREQUENCY        ANTENNA

A

 

SCAN TUNNING

      Turn on the Radion by pressing On/Off Button
      (1).Select AM,FM or TV Band by pressing
      Band Selection Button(7) and then press and
      Hold the Tuning Control(5) or(6) for more than
      1/2 second. The Radio will Scan all the 
      frequencies in that Band and will stop
      automatically for 3-4 seconds each time it
      lands on an active station.Push the Tuning
      Control again and the Radio will stay at the 
      Station you have selected. The Radio will turn
      tself off automatically after 60 minutes of
      Operation or you may turn it of at anytime by 
      Pressing the On/Off Button.

7

Summary of Contents for DT-200V













Reviews: