GB
6
Memory Tuning (Station preset)
Turn on the radio by pressing and releasing POWER/BAND
button. Select the required band by pressing POWER/BAND
button. Tune to the desired station using the Scan or Manual
tuning steps described above. When the desired station is
reached, press and hold Memory button (-5) for more than
seconds until display M x stops flashing followed with a
beep (via earphone). You may store 5 memory stations in
each band (AM, FMI, FMII). Stations which are already stored
in the presets may be over written by following the above
procedure.
Recall memory stations
Turn on the radio, select the required band, then simply press
and release the Memory station button. The LCD display will
show the Memory preset and radio frequency.
Stereo/Mono switch
The radio is designed to receive FM stereo broadcastings.
For weak FM signal, press in the jog wheel, the “SET” symbol
will appear on the LCD display. Then press MO/ST button
to switch Stereo/Mono to Mono position. The LCD display
Stereo icon will disappear.
Summary of Contents for DT-160CL
Page 1: ...DT 160CL GB Version 1...
Page 2: ......
