Sangean dpr-39, User Manual

Page: 7 / 16

6
GB
Initial operation-DAB
This step is only necessary for initial setup-
1. Make sure a headphones/an earpiece is plugged in.
2. Press the Power button on the top of your radio.
3. The display will show “Welcome to Digital Radio” and start
to scan the entire DAB+ channel range and stop at the first
found station. If the radio has been used before, the last
used station will be selected. Press in the tuning/menu jog
wheel to play the station.
4. Turn the jog wheel either up or down to display station list
and find desired station. Press in the jog wheel to select
the station. The radio will tune to the station and display
the station name.
5. Adjust the volume control for comfortable listening.
Service Information-DAB
The Service Information display-Technical information on the
current status of the station being broadcast.
While listening to DAB+, continually press in the jog wheel to
cycle through information on:
a. Program type (PTY)
b. Multiplex Name
c. Time
d. Date
e. Channel and Frequency
f . Bit Rate and Codec
g. Signal Strength