manualshive.com logo in svg

Sangean DCR-89+, User Manual, Page: 30 / 32

Share
Download
Sangean DCR-89+ User Manual Download Page 30

9

Software upgrade

From time to time, new software features for your radio may be developed. Your radio has 
therefore been designed to allow its internal software to be updated using your USB upgrade 
port. You should not attempt to update your radio unless it is recommended to you by Sangean 
Customer Services. Updating the software may remove all network settings, radio station presets
and alarm settings from your radio.

Software updates for your radio may be available in the future.
As software updates become available software and information on how to update your radio can 
be found at
http://sg.sangean.com.tw/first/first.asp
http://www.sangean.eu/first/first.asp
www.sangean.com.au.
For more information, please contact our Head Office by sending an
email to [email protected]

. Plug the USB into the USB socket in the rear of the unit and your PC USB port.

. Press and hold the Menu / Info button to enter the setting menu. Press the Tuning up or down 
    until ‘System Setting’ shown on the display and press the Select button to enter the setting.

3. Press the Tuning up / down button until ’Software Upgrade’ appeared on the display. Press the 
    Select button to enter the setting.

4. Go to the website above to download the latest software. Follow the on-screen instructions 
    provided with the upgrade software to complete the software upgrade.

Summary of Contents for DCR-89+

































Reviews:

No comments