9
Presetting AM/FM Stations
You may store up to 5 station presets for each FM/AM band. Using the
preset buttons saves your time when searching your favorite stations.
1. Press the STANDBY button to turn the radio function on, then tune to
your desired station.
2. Press and hold the required PRESET button (1 to 5) for 2 seconds
until there is a beep sound, and the display shows “PRESET 1”.
The station will be stored using the chosen preset number.
Repeat this procedure for the remaining presets as you wish
3. Preset memories which have already been stored may be overwritten
by following the above procedure if required.
Recalling a Preset AM/FM Station
1. Press the STANDBY button to turn the radio function on.
2. Select the desired waveband by pressing the BAND button.
3. Momentarily press the required PRESET button (1 to 5) to tune your
radio to the station stored in preset memory.
Selecting the Weather Band Channel
To receive alerts, you must first select the correct weather channel.
NOAA broadcasts on the weather band on seven channels in
25kHz increments, between the frequencies of 162.400MHz
and 162.550MHz.
To identify the appropriate channel for your area, visit the NOAA
website at:
http://www.nws.noaa.gov/nwr/indexnw.htm
The table on the NOAA website includes the correct weather band
channel for your area, the SAME code and the location of the
broadcast tower. Look for the state in which you live and then search
the list for your county. Use the channel listed for your county when
programming the radio.
Summary of Contents for CL-100 - REV 1
Page 1: ...CL 100 GB Revision 1...
