27
Your cassette recorder has a built-in condenser microphone [21] on the front of the cabinet.
To record with the built-in microphone follow the following steps:
To Record with the Built-in Microphone
1.Select CrO2/NORMAL Tape Selection
Switch [38]
2.Press RECORD [26] and PLAY [27] but-
tons simultaneously. RECORD will re-
main in the locked position and the
RECORD LED [23] will illuminate in-
dicating recording is in progress.
The tape will stop automatically when
it comes to the end of a side. At this point
the RECORD button and the PLAY button
will disengage and the recording will be
terminated.
3. To listen to your recording it will be
necessary to Rewind the tape, Stop the
tape, and then press the PLAY button
[27].
Note:
To record the current tuned program follow these steps:
To Record from the Radio
1.Install blank tape and select CrO2/
NORMAL Tape Selection Switch [38].
2.To reduce interference when recording
AM(MW,LW or SW) switch BEAT CUT
Switch [40] to on position.
3.To listen to recording, rewind tape and
press PLAY [27].
The volume and balance controls
have no effect during recording .They only
Effect the play operation. The recording level
is set automatically by the alc (Automatic
Level Control) circuit.
Note:
31
30
29 28
27
26
32
31
30
29 28
27
26
32
