Sangean ATS-405, Manual

Page: 18 / 32

GB
7
There are 4 pages of preset memory each FM and MW
band and each page covers 9 preset stations. When the
ATS is completed, a beep will sound and radio will stop
at strongest station within your area, To recall the preset
station, press the PAGE button to allocate Page A to D,
then press the preset numeric button.
2. Direct Tuning using the numerical key pad (0-9)
If you know the radio station frequency, select required
MW, FM or SW band by pressing BAND button then press
FREQ button, display will show--.-and flash selected wave
band, using the numerical key pad 0-9 to enter the station
frequency. Press the ENTER button to select the frequency.
Example, for FM band 03.30 MHz, first select FM
band, then press FREQ then the numerical button , 0, 3,
3. Press ENTER button to select the frequency.
3. Manual tuning using Tuning Up and Down button
Turn on the radio, select a waveband by pressing BAND
button. A single press on either the Tuning UP or Down
button will change the frequency Up or down.
4. Scan tuning
Press and hold the Tuning UP or Down button will
automatically scan station frequency and stop when a
station is found.