6.
Set the time correction
of sunset time using
+
and
-
then vali-
date by
enter
.
7.
Activate the
astro
mode by selecting
On
using
+
and
-
then
enter
to have the product switch on the
control circuit automatically according to the astronomical
parameters.
8.
For 04567 clock, select channel
C1
or
C2
with
+
or
-
and validate
with
enter
.The symbol
on main
display will indicate if the channel is in
astro mode.
1.
Select the
prog
mode using
menu
then
enter
.
2.
Select the channel (
C1
or
C2
) using
+
or
-
then
enter
(only applicable to 2-channel clock 04567). The
number of remaining program steps appears for a short
time.
3.
new
flashes, press
enter
to validate this new program
steps.
4.
Choose the day(s) using
+
or
-
.
Validate with
enter
.
5.
ok
flashes. Use
enter
to validate the group of days.
-
or
makes it possible to reset the group of days if
necessary.
6.
Using
+
or
-
, select instruction state:
-
On
or
Off
if your are in automatic astronomical mode.
-
On
,
Off
,
On
or
Off
if your are in expert mode.
7.
Enter the time of switch-on using
+
or
-
.
Validate with
enter
.
8.
Enter minutes with
+
or
-
.Validate with
enter
. Program
the other instructions of the group of days by repeating
operations 3 to 8. The day or the group of days may be
modified at the during step 3 by pressing the
+
,
-
or
.
At the end of programming return to
auto
mode using the
menu
button.
To set the program of the other channel, return to
prog
and proceed according to steps 2 to 8.
In this mode it is also possible to add an instruction to the
program set up.
Proceed as described above.
Programming
Programming may be done for each
day or for a group of days. In this case
instructions are common to several
days.
Days:
1 = monday,
2 = tuesday,
3 = wednesday…7 = sunday.
Display
To check the daily profile set up without the risk of
modification or deletion. Select the mode
using
menu
and
enter
.
Select the channel (
C1
and
C2
) using
+
or
-
and
enter
.
The first step of Monday is displayed as well as the daily
profile.
Two options available for display:
1.
Pressing repeatedly
+
or
-
: lets you shift days. In this
case only the first daily step is displayed as well as the
daily profile.
2.
Pressing
enter
: all steps of each day appear one
after the other.
Key
As soon as the key is inserted into the switch,
appear
on the screen.
Two types of operation:
A. Permanent override:
insert the key into the switch.
After 10 seconds the program contained in the key will be
executed without clearing the program contained in the
time switch.As soon as the key is removed the program of
the time switch is again valid.
B. Copy (load)/Save (save):
the key makes it possible to
save a program contained in the time switch. It is also pos-
sible to copy the contents of the key into the clock (pro-
gram + astro settings).
1.
Insert the key and wait for 2 sec.
2.
Using
menu
, select the mode:
save
(to save a program contained in the time switcher),
load
(to load the program of the key into the time switch),
(to check the program contained in the key) .
3.
Validate the selection with
enter
.
4.
For
save
and
load
reconfirm with
enter
.
The following error messages may appear on the screen:
no prog
: the key is empty, it does not contain any program.
Error
: incompatible key type.
In these two cases:
•
Only the
save
mode is possible.
•
The error message remains on display as long as the key
is present, but in this case the program of the time switch
is executed.
Override
04566
: by pressing repeatedly on
-
for channel C1
04567
: by pressing repeatedly on
-
for channel C1 and on
+
for channel C2.
If the state of the output is
On
:
1st press:
temporary override.
Off
and flash. The
next program step will let you return to the
automatic mode.
2nd press:
permanent override.
On
and are
per-
manent. This override must be cancelled
manually.
3rd press:
temporary override 15 minutes.
On
,
and
15
are permanent.The return to auto-
matic mode will take place after 15 min.
4th press:
temporary override 30 minutes.
On
,
and
30
and 30 are permanent.The return
to automatic mode will take place after
30 min.
5th press:
temporary override 60 minutes.
On
,
and
60
are permanent. The return to
automatic mode will take place after 60
min.
6th press:
permanent override.
Off
and are
per-
manent. This override must be cancelled
manually.
7th press:
return to the automatic mode.
Technical spécifications
Electrical characteristics
•
Supply voltage:
230 V AC ± 15%
•
Frequency:
50/60 Hz
•
Power consumption:
max. 6 VA to 50 Hz
•
Output 04566: 1 changeover volt free contact
•
Output 04567: 2 changeover volt free contacts
•
Maximum load:
AC1
µ16A 250 V~
Cos
φ
= 0,6
µ10A 250 V~
Incandescent lighting
2300 W
Halogen lighting 230 V
2300 W
Compensated fluorescent tubes //
(max. 45 µF)
400 W
Non compensated fluorescent tubes,
Compensated in series
1000 W
Compact fluorescent lamps
500 W
•
Minimum current.
AC1
100 mA 250 V~
•
Galvaniinsulation between power supply and out-
put < 4 kV
Functional characteristics
•
Programming capacity:
56 steps
•
Minimum time between 2 steps:
1 minute
•
Running accuracy:
± 1,5 sec / 24h
•
Astronomical time accuracy:
± 10 minutes
•
Operating reserve: lithium battery pro vides 5
years of backup.
•
The product is set into standby state (display swit-
ched-off) after 1 minute with power off. It switches
back into
auto
mode as soon as power is back or
when pressing any key.
•
Protection degree:
IP 20
Environnement
•
Operating temperature:
-10 °C to +55 °C
•
Storage temperature:
-20 °C to +60 °C
Connection
•
Flexible capacity
1 to 6 mm
2
•
Rigid capacity:
1,5 to 10 mm
2
The products need to be protected according to the
standards NF15 100 and/or IE60 364-1.
Connection diagrams:
04566: 1 channel
04567: 2 channels
Modification or clearing of a program
step: prog modif
Select the
prog
mode with
menu
and press
enter
Select
the channel (
C1
or
C2
) using
+
or
-
and
enter
.
Select the
modif
mode with
+
or
-
.Validate with
enter
.
The number of remaining program steps appears
for a short time.The first step of the first day or group of
days appears. Repeatedly pressing the
enter
key displays all
programmed steps one at a time. Any flashing field (state,
hour, minute) may be modified using
+
or
-
, then validated
with
enter
.
When the cursor is positioned on
ok
located behind the
group of days, you may display successively the days or
the groups of days and switch directly to the one that
has to be modified using
+
or
-
.
To remove a program step: select the state of the channel
(
On, Off On
or
Off
), press simultaneously
+
and
-
.
Clear
appears on the screen.Validate with
enter
.
2
Limit of operation in Astro mode
In this mode the clock is pre-programmed according to
sunrise and sunset hours. On and Off interrupt steps
can be added to customize the program.The program-
ming is disabled between Astro Off and Astro On.
Programming
disabled
0 h
24 h
Astro
On
Astro
Off
Locking
To prevent all undesirable actions,the keyboard of the time
switch may be locked using a key 23193.
Unlocking is done in the same way.
