Page 3
Page 6
Electrical Installation and Connections
• This product must be installed by a competent person in line with the latest IEE regulations
• Isolate mains before commencing installation
• Using supplied wall mount box and fixings secure in desired position and route wires through rear
entry hole. Connect wiring in accordance with information printed on receiver, Wiring diagrams
shown.
Set/Review Program
Each of the 7 days of the week can be programmed separately. Starting with Monday (MO)
Press SET
Mon, Morn (P1) temperature set
Adjust by +/-
Press OK
Mon, Morn (P1) time set
Adjust by +/-
Press OK
Mon, Day (P2) temperature set
Adjust by +/-
Press OK
Mon, Day (P2) time set
Adjust by +/-
Press OK
Repeat procedure for all 6 setpoints in the day and for the rest of the week
Press SETx2 & OK
Return to Run Mode
Program Copy
To speed up the programming sequence you can copy a days program settings into other days.
Press SETx2
Choose ‘From’ reference day
Select by +
Press OK
Choose ‘To’ day
Select by +
Press OK
Repeat as required for next ‘To’ day
Select by +
Press
To delete a selected ‘To’ day
Press OKx2
To accept & return to Run Mode
Temporary Override
Change temperature until next programmed set point
Press +/-
Temporary Override & Temp Set displayed
Press OK
To cancel and return to Run mode
Comfort Override (Timed)
Change current temperature to a new set point for a time period up to 99 hours. The thermostat
shall resume its original programming after the comfort override has stopped.
Press M
Temp Set flashing
Adjust by +/-
Press OK
Hours flashing
Adjust by +/-
Press OK
Comfort Override, Temp Set & Hours displayed
Press OK
To cancel and return to Run mode
Permanent Hold Temperature
Hold temperature at the desired set point until cancelled.
Press Mx2
Temp Set flashing
Adjust by +/-
Press OK
Permanent Hold Temp, Temp set displayed
Press OK
To cancel and return to Run mode
