-
9 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
Disable vehicle. The system would send back a message of current position of
vehicle.
◆
111111RES
Able vehicle (Center stop & robbery alarming can be relieved by center only),
The system would send back a message of current position of vehicle.
◆
111111CHK
Inquiry car position information.
The system will send back a SMS, with Arm /Disarm state, LONG, LAT, speed,
direction.
◆
111111MON
＊
Sound monitor around the car.
The
＊
is the telephone which is used to monitor the voice. When user send
this command to the system, the system will call back the telephone
＊
,
user could listen in the voice around the car upon picking up the call.
◆
111111ZD
＊
If
＊
is 1, the instruction 111111ZD1 is to enable the shock sensor
If
＊
is 5, the instruction 111111ZD5 is to disable the shock sensor
◆
CEN666666#4
When you have pressed the SOS button, you need to send this command to
disarm the car. For the SOS alarm you can not disarm the car by remote
control and 111111DSM command.
4.3 Auto position function
-
10 -
GPS/GSM CAR ALRM SYSTEM
Operating Instruction
1) Command:
CEN666666#51:11
2) Command:
CEN666666#16:
X
,
0
X is the interval time(0 to 255)
1)if X is set in 0,there is no SMS be sent back.
E.g.
CEN666666#16:10,0
there is SMS be sent back every 10(seconds)
Remark: Please set up both command one by one.
4.4 Geo-fence function
Command:
111111FENx(XL:a,YL:b,X:c,Y:d)
Or
111111FENxXL:A,YL:B,X:500,Y:500
If x=0
，
deactivate the function of geo-fence, x=1, activate the geo-fence
function
XL
：
a
，
a is latitude(degree), the range of the value is
（
0-90
）
YL
：
b
，
b longitude (degree), the range of the value is
（
0~180
）
X
：
c
，
c is the distance of latitude (Meter)
Y
：
d
，
d is the distance of longitude (Meter)
Format of commands
：
111111FEN
？
Check the setting of geo-fence
111111FEN0
Deactivate the Geo-fence
111111FEN1
Activate the geo-fence, using the parameters of the previous
setting
111111FEN1()
Activate the geo-fence, using the latitude & longitude of present
location, the distance of latitude & longitude are 1000 meters .
111111FEN1(X:c)
only change the distance of latitude, the other parameters
keep the same.
111111FEN1(Y:D)
only change the distance of longitude, the other
