Saneo SaneoTENS Pain Relief, Instruction Manual

Page: 48 / 52

en
20
Program overview
Programming unrestricted-use programs
Therapy programs U1 , U2 and U3 can be changed as required.
U1: Basic program – continual stimulation
U2: Basic program – frequency modulation
U3: Basic program – burst stimulation
Parameter overview
Depending on the basic program, only specific parameters can
be set. Please refer to the table below for sequence and
significance of the individual parameters.
The value range of the parameters is indicated (in brackets).
Programming of medically effective and meaningful
parameter values that can be combined should only
occur after consultation with your doctor or therapist.
Parameter Description (value range)
Hz Treatment frequency in Hz (2 to 120)
Rise time in sec (0.5 to 5)
Plateau time in sec (1 to 10)
Descent time in sec (0.5 to 5)
Pause time in sec (1 to 10)
dEL
Pause between burst groups
in sec (0.1 to 5)
Treatment time in min (5 to 99)