Guide the cable through the centre of the two base plates and then push the two
plates together as shown below :
Place the fan unit on top of the base :
Secure the base with the nut, then feed the cable through the groove in the outer
edge of the base, as shown in the two photos below :
Ensure that all parts are correctly installed as described above.
Important: Never use the fan without its base!
The appliance should only be used in an upright and vertical position. Do not use it
in a horizontal position.
Once the fan is correctly assembled, place it on a dry and stable surface before
inserting the plug into the socket.
Once the fan is plugged in, it emits a short "beep" sound. The unit can be operated
either from the control panel or with the supplied remote control.
