3
splwashrooms.co.nz
Operating Instructions and Parts Manual
Please read carefully before attempting to assemble, install, operate or maintain
the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/
or property damage. Retain instructions for future reference.
Sanela Austere Sensor Tap
Sensor activated tapware for cold and pre-mixed water. High quality electronics
combined with elegant aesthetics.
Specifications
Finish
Water Temperature
Power Supply
Control
Operating Voltage
Active Range
Recommended Pressure
Rate of Flow
Water Inlet
Dimensions
Warranty
Chrome
For cold or premixed water (thermostatic mixing valve
available)
24V DC (230V AC into power supply)
Infra-red sensor
24V DC, 7W
Standard 0.13 - 0.19 m, START/STOP program 0.05 - 0.15 m
0.1 - 0.6 Mpa (1-6 Bar)
3.8 l/min (6 l/min or 1.9L/m avaiable on request)
Male thread G 1/2”
Height 152mm, Depth 145mm, Tap Diameter Ø 54, Hole Ø
35mm, Nosing 97mm, Discharge Height 128mm
24 Months
Planning
• Ensure an appropriate piping design (sizing etc). This will eliminate issues arising from
flow, pressure and water hammering.
•
Where appropriate install necessary filters, water hammering arrestors and water
pressure reducing valves (recommended pressure 1 to 6 bar). This will minimise future
maintenance.
• Install the angel valve to enable ease of future maintenance.
Tempered Water
• An appropriate thermostatic mixing valve (TMV3) should be installed to ensure a safe
regulated water temperature. These are available from SPL – SST THERMO VALVE
