KWS 3000-CML - User Guide, Rev.1.0
// 43
Mass Storage
Drive bays
1x 3.5“ HDD or 1/2x 2.5” HDD/SSD (Raid, removable or fixed)
1x 3.5“ HDD or 1/2x 2.5” HDD/SSD (Raid, removable or fixed)
1x 3.5“ HDD or 1/2x 2.5“HDD/SSD (Raid, removable or fixed))
1x 3.5“ HDD or 1/2x 2.5“HDD/SSD (Raid, removable or fixed)
1x DVD/CD slimline
M.2 SSD
1x 2280 Key M
NVME module with Interface: SATA/PCIe x4
Fan
System Fans
2x Fans (behind front panel)
Internal Fans
1x PSU (integrated in PSU)
1x CPU (heatsink with fan)
Up to 4 Expansion cards (Integrated fans)
Software Specification
Table 12: Software Specification
Software
Description
BIOS
AMI SPI 256 Mbit
Operating System
Windows 10, 64 bit
Drivers
Necessary drivers provided by the 3rd party device supplier
UEFI only! No legacy support and no Master Boot Repair (MBR) installation.
Power Specification
The KWS 3000-CML electrical specification is available on the product’s type label (see Figure 1, pos.4).
Table 13: Electrical Specification
Power
Description
PSU Type
Industrial AC/DC
Output Power
400 W single or
750 W single
Input Voltage
100 VAC to 240 VAC (60Hz to 50 Hz)
Input Current
6 A to 3 A
Do not disconnect the power from your product while the product is in the powered on state!
Performing a forced shutdown can lead to loss of data or other undesirable effects!
