S&T kontron KSwitch D4, User Manual, Page: 61 / 101

KSwitch D4 MM Managed Ethernet Switch - Preliminary User Guide, Rev. 0.9
www.kontron.com // 61
Parameter Description
Port Selection Select corresponding port
Index Select Index, the Service tag of this index can be set in
QinQ Index Config webpage.
Tagging Add : Add Service Tag on the packet, if the Service Tag already exist
on packet, will be based on Rx detect status to modify or replace
Service tag.
RMV : Remove Service tag when Rx detect enable.
Rx detect Enable/Disable Service tag checking.
Keep PCP/DEI Define if keep original PCP and DEI when modifying Service tag.
9.8.8. QinQ Index Configuration
VLAN Configuration -> QinQ Index Configuration
Parameter Description
Type Configure Service Tag Type
Index Configure Service Tag that is correlated to Index