KBox B-201-CFL - User Guide, Rev 1.3
// 49
9.3.
Power On/Off Procedure
To switch on the KBox B-201-CFL, connect to the power source as described in Chapter 9.1: Connecting the External
Power Connection, and briefly press the power-on button (Figure 4, pos. 3) .The power-on button lights up blue to
indicate the powered on state.
To switch off the KBoxB-201-CFL, close all open applications and briefly press the power-on button. The power-on
button dims to indicate the powered off state. The KBoxB-201-CFL is only completely in the powered off state when
the power cable is disconnected from the DC-IN connector or the main power source.
Completely disconnect the power by disconnecting the power cable from the DC-IN
connector or the main power source. Switching off only using the power-on button may
leave internal parts energized.
9.3.1.
Forced Shutdown
Pressing the power-on button for longer than four seconds initiates a forced system shutdown, before switching off
the power. If power is still applied to the DC-IN connector, the product can be restarted by pressing the power-on
button
Do not disconnect the power from the product while the product is switched on.
Performing a forced shut down can lead to loss of data or other undesirable effects.
9.4.
Operating System (OS) and Hardware Component Drivers
The KBox B-201-CFL supports flexible software options with different Operating System (OS) and drivers support for
factory configured hardware components.
Ordered with a pre-installed OS and all appropriate drivers (according to with ordered hardware configuration) the
product is fully operational when switched on for the first time. If ordered without a pre-installed OS, users need to
install the OS and the appropriate drivers before switching on for the first time.
For information regarding supported software, see
Table 7: Software Specification.
To download relevant KBox B-201-CFL drivers for factory installed hardware components
visit Kontron’s Customer Section
Pay attention to the manufacturer OS specifications relating to integrated hardware
components.
