KBox A-150-SKL - User Guide Rev. 1.1
// 30
Figure 12: SBC Mainboard Fastening Screws
1
2x Bottom head Torx (M3x5) screws
2
2x Screws fasten the front panel to SBC to
form a Front panel-SBC assembly that slides
in/out of the chassis.
Do not remove or loosen the screws!
Do not remove or loosen the two screws (Figure 12, pos. 2) that fasten the front panel and
SBC together to form a SBC-front panel assembly that can slide in/out of the chassis.
4.
Turn the system around with the bottom side facing upwards. Remove the screw located in the middle of the
front panel (Figure 13, Pos. 1). Then remove the two screws located on the front panel’s right and left sides
(Figure 13, Pos. 2). Retain the screws for later use.
Figure 13: Front Panel Fastening Screws
1
1x Flathead (M2 5x6) screw
2
2x Flathead (M2 5x6) screw (right side & left side)
1
1
2
2
