S&T Kontron KBox A-150-SKL, User Manual

Page: 17 / 73

KBox A-150-SKL - User Guide Rev. 1.1
www.kontron.com // 17
3/ Shipment and Unpacking
Packaging 3.1.
All parts are delivered together in a product specific cardboard package designed to provide adequate protection to
absorb shock. Kontron recommends keeping the packaging to store or transport the product.
Unpacking 3.2.
To unpack the product, perform the following:
1. Remove packaging.
2.
Do not discard the original packaging. Keep the original packaging for future transportation or storage.
3.
Check the delivery for completeness by comparing the delivery with the original order.
4.
Keep the associated paperwork. It contains important information for handling the product.
5.
Check the contents for visible shipping damage.
6.
If you notice any shipping damage or inconsistencies between the contents and the original order, contact
Kontron for help and information.
Scope of Delivery 3.3.
Check that your delivery is complete, and contains the items listed below. If you discover damaged or missing items,
contact your dealer.
Table 1: Scope of Delivery
Delivered Item Part Description
KBox A-150-SKL Corresponding to the ordered product configuration
Phoenix Power Connector 3-pin DC mating power connector (PSC 1,5/ 3-F) inserted on DC Input Power connector
DIN Rail Clamp DIN rail clamp installed on the rear side using 2x M4x6 screws
HDD Protective Film Adhesive protective film attaches to the 2.5”HDD/SDD to protect the HDD/SSD against
antistatic electrification when touched. ( External drive bay variant only)
General Safety
Instructions for IT Equip. General safety instruction when operating or handling IT equipment
Accessories 3.4.
Table 2: Accessories
Part Number Part Part Description
EE04-100001-01 Power connector (3-pin) Phoenix DC mating power connector (PSC 1,5/ 3-F) in
DSUB 9 housing
ER40-100001-01 Power Supply 24 V External AC/DC PSU with 50 W, 24 VDC at 40°C
840-0059 Power cable EU Power cable AC mains to external adapter, Europe, UK
and USA
840-0115 Power cable UK
840-0405 / 0-0064-4317 Power cable US
PM00-100057-01 HDD/SSD extension frame Adjusts drives installation height from 7 mm to 9 mm
EN05-100003-01 Heatsink kit Heatsink with four screws (M4x8 )