S&T kontron COMe-cVR6, User Manual

Page: 55 / 90

COMe-cVR6 – User Guide Rev. 1.5
www.kontron.com // 55
8.2.1. Connector X1A Row A1 – A110
Table 64: Connector X1A Row A Pin Assignment (A1- A110)
Pin Signal Description Type Termination Comment
A1 GND Power Ground PWR GND --- ---
A2 GBE0_MDI3- Ethernet Media Dependent
Interface 3 - DP-I/O --- ---
A3 GB Ethernet Media Dependent
Interface 3 + DP-I/O --- ---
A4 GBE0_LINK100# Ethernet Speed LED OD --- ---
A5 GBE0_LINK1000# Ethernet Speed LED OD --- ---
A6 GBE0_MDI2- Ethernet Media Dependent
Interface 2 - DP-I/O --- ---
A7 GB Ethernet Media Dependent
Interface 2 + DP-I/O --- ---
A8 GBE0_LINK# LAN Link LED OD --- ---
A9 GBE0_MDI1- Ethernet Media Dependent
Interface 1 - DP-I/O --- ---
A10 GB Ethernet Media Dependent
Interface 1 + DP-I/O --- ---
A11 GND Power Ground PWR GND --- ---
A12 GBE0_MDI0- Ethernet Media Dependent
Interface 0 - DP-I/O --- ---
A13 GB Ethernet Media Dependent
Interface 0 + DP-I/O --- ---
A14 GBE0_CTREF Center Tab Reference Voltage O --- 100nF capacitor
to GND
A15 SUS_S3# Suspend To RAM (or deeper)
Indicator O-3.3 PD 10k ---
A16 S SATA Transmit Pair 0 + DP-O --- ---
A17 SATA0_TX- SATA Transmit Pair 0 - DP-O --- ---
A18 SUS_S4# Suspend To Disk (or deeper)
Indicator O-3.3 PD 10k ---
A19 S SATA Receive Pair 0 + DP-I --- ---
A20 SATA0_RX- SATA Receive Pair 0 - DP-I --- ---
A21 GND Power Ground PWR GND --- ---
A22 S SATA Transmit Pair 2 + DP-O --- ---
A23 SATA2_TX- SATA Transmit Pair 2 - DP-O --- ---
A24 SUS_S5# Soft Off Indicator O-3.3 PD 10k ---
A25 S SATA Receive Pair 2 + DP-I --- ---
A26 SATA2_RX- SATA Receive Pair 2 - DP-I --- ---
A27 BATLOW# Battery Low I-3.3 PU 3.3V (S5) assertion will
prevent wake
from S3-S5 state
A28 (S)ATA_ACT# Serial ATA activity LED OD-3.3 PU 10k 3.3V
(S0) ---