COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2
www.kontron.com
// 16
2/
System specifications
2.1.
Component Main Data
The table below summarizes the features of the motherboard.
Table 2: Component Main Data
COMe Eval Carrier2 T6
Form factor
Testing Hardware with 244.0 mm x 305.0 mm (ATX)
Memory
EEPROM System
(U13)
JILI EEPROM
External I/O
LAN
1x Gbit-Ethernet port
USB
4x USB 3.1 + 4x USB 2.0 double stack
Internal I/O
SATA
4x Gen3 slots
Feature Connector
1x connector with 2x12 pins
PCIe
1x x16, 8x x1
LEDs
SMD LEDs e.g. for
VCC/Type/Ethernet/HDD/USB_OC/CPLD0,1/THRMTRIP/SUS_STAT,S3,S4,S5
GPIO
GPIO Header with 10 pins
I2C
Feature Connector (J57)
Battery
CR2032 battery holder
Fan
4-pin fan connector, Voltage can be 5
V or 12
V (default 4-pole)
Carrier Board Power
Power input
Carrier is powered from standard ATX power supply with ATX 24-pin and8-pin connectors.
Single Supply
Support
carrier requires ATX power
S-States
S3, S4, S5
S5 Eco Mode
yes
Kontron Features
M.A.R.S. support
no
Watchdog support
Triple Staged
Miscellaneous
Miscellaneous
2x UART, 7-Segment Postcode Display
Graphics
DisplayPort DP
3x DP
VGA
1x VGA
LVDS
1x LVDS, 1x eDP
Danger of explosion if the lithium battery is incorrectly replaced.
•
Replace only with the same or equivalent type recommended by the manufacturer
•
Dispose of used batteries according to the manufacturer’s instructions