COMe Eval Carrier2 T6 (ADT6) User Guide Rev 1.2
www.kontron.com
// 40
Figure 19: Jumpers 5V_MOD and V_WIDE_MOD
Jumper "5V_MOD": If this Jumper is closed, the V_5V0_S5 voltage is provided to the Com
Express Module. If the Module should run at Single Supply Mode, this Jumper has to be
removed.
Jumpers "V_WIDE_MOD": If these two Jumpers are closed, the Wide Range input Voltage
(J99) is provided to the Com Express Module. If these Jumpers are removed, the Module
won’t start. Each Jumper can handle up to 8 A, because there are two Jumpers in Parallel a
input current up to 16 A can be delivered. If the Input Current should be measured, this
should be done at this place.
