S&T A1-lite User Manual Download Page 18 | Manualshive

Page: 18 / 21

S&T A1-lite User Manual Download Page 18

IntelliTrac A1-lite Series User Guide

Systems & Technology Corp. © 2010

This document contains confidential, restricted, and proprietary information. The document has been prepared for the
exclusive internal use of certain designated S&T employees and may not be duplicated or distributed, in whole or in
part, without the prior, written consent of an authorized officer of S&T.

- 15 -

Firmware Upgrade

The IntelliTrac A Series device firmware is updated through the serial interface. The firmware update of the

device can be performed with the IntelliTrac A series firmware loader tool provided by S&T. It runs on

Windows based PCs. Please see the following step-by-step upgrade procedure.

(1) Connect the RS232 cable between device an PC.

(2) Turn on the device.

(3) Run AseriesLoader.exe, the following window is displayed.

(4) Click […] button to open firmware file which provide by S&T

(5) Click Write button and start firmware programming.

(6) When the writing progress 100% is reached, the device LEDs will start to fast blinking.

(7) Wait until device LEDs stop fast blinking.

(8) Firmware update complete.

«
...
16
17
18
19
20
...
»

Summary of Contents for A1-lite






















Reviews:

No comments