22
GB
Hardware Connection – Internet
To connect the Powerline Adaptor to your existing broadband
service, follow the steps below:
1. Connect the Ethernet cable to an available Ethernet port of
your ADSL Broadband Router.
2. Connect the other end of the Ethernet cable to the Powerline
Adaptor’s Ethernet port.
3. Plug the Powerline Adaptor into a mains socket next to the
computer. Ensure the wall socket is turned ‘ON’. Turn on your
computer.
4. Check and confirm that the
Power
indicator ,
Ethernet
indicator , and
Powerline
indicator on the Powerline Adaptor
are
ON
.
5. If the
Powerline
indicator does not illuminate, please follow
the routine for pairing the Powerline Adaptors.
The Powerline adaptor must NOT be connected to:
• an extension lead / cord / board
• a multiplug
• a surge protector
The above may negatively affect your home network performance.
SSPL500_IB_7L_Final_130130_chris.indb 22
1/2/13 3:57 PM