GB
9
Hints and Tips
Mouse Not Working:
1. Check that the power switch is in the on position.
2. Make sure the Nano Receiver is plugged into a USB
port and the computer is on or try the Nano Receiver
in a different USB port.
3. Check battery installation. Replace battery if needed.
4. If mouse performance is slow or intermittent around a
wireless network, unplug the Nano Receiver from the
USB port and then reinsert it. To reactivate the mouse,
switch it on, off and on again using the ON/OFF
switch on the bottom of the mouse.
5. Repeat the connection procedure. You can also try
moving the mouse closer to the Nano Receiver.
6. If the mouse is moving erratically change the working
surface which the mouse is operating on.
DPI Button
The brightness of LED indicator on the DPI Button
indicates the DPI setting in use. There are two different
settings:
1. Bright: 1600 DPI
2. No light: 1000 DPI
The default setting is 1600 DPI. You can easily switch
between DPI settings. In order to save power, the LED
display will only last for 10 seconds.
SJEWEL_IB_7L_Revised120502.indb 9
02/05/2012 7:12 PM
