9
INSTALLATION
water mains
water supply hose
Y-Adaptor
(not included)
Connect to
another
appliance
if required.
max.
10cm
You.may.use.a.Y-adaptor.(not.included).for.an.additional.water.
feed.for.another.appliance,.for.example.a.washing.machine..This.
is.only.applicable.for.cold.water.mains..A.Y-adaptor.is.available.
from.most.DIY.stores.
8.. Adjust.the.screw.to.ensure.that.the.door.is.
horizontally.aligned.to.the.cabinet.
Adjustable
Screw
•. Do.not.bend.your.drain.hose.
•. Do.not.lift.the.drain.hose.higher.than.10.cm.
from.the.table.top,.otherwise.the.unit.may.not.
be.able.to.expel.the.waste.water.properly.
9.. Make.sure.your.plumbing.is.suitable.for.use.with.
the.dishwasher..If.in.doubt.contact.a.qualified.
plumber..This.unit.MUST.BE.connected.to.COLD.
WATER.MAINS.using.the.new.water.inlet.hose..
OLD.HOSE.SETS.MUST.NOT.BE.RE-USED..The.
water.pressure.from.the.water.mains.needs.to.
be.at.a.minimum.of.0.04.MPa.and.a.maximum.of.
1.00MPa.
•. Connect.the.other.end.of.the.hose.to.your.
water.mains..Please.ensure.the.black.rubber.
seal.is.in.place.
•. After.connecting.the.hose,.turn.on.your.water.
mains.and.check.for.leaks.
•. Connect.the.dishwasher.to.the.mains.socket.
SIDTTX11_IB_100526_Annie.indd 9
11年5月26日 下午4:03
