44
GB
Spray Arms
Particles of food can get stuck in the spray
arm jets and bearings. The spray arms should
therefore be checked and cleaned regularly.
1. Switch off the unit.
2. Remove the upper spray arm.
3. Remove the lower spray arm:
Grip firmly and pull upwards
4. Wash the spray arms in warm soapy water. Use a soft brush to clean the jets.
5. Rinse thoroughly, then replace.
Do not attempt to remove the spray arms.
Frost Precaution
Avoid placing the dishwasher in a location where the temperature can get below 0˚C. If your
appliance is left in an unheated place over the winter, you are advised to:
1. Disconnect the unit from the water inlet.
2. Turn on the unit. Select any washing cycle and let it run for 1 minute only. This drains out all
the excessive water that remains in the unit.
3. Disconnect from the mains socket.
4. Empty the dishwasher.
5. Close the dishwasher’s door.
6. Disconnect the unit from the water drain. Use a suitable receptacle to catch any residual
water in the pipes.
Should you encounter any difficulties with the above steps, please ask a service technician for
assistance.
SDW60W_X14N_IB_5L_140604_grace.indb 44
4/6/14 6:26 pm
