Sandstrom SDW60B12, Instruction Manual

Page: 22 / 36

22
It is advisable to leave the door closed until you are ready to unload the crockery. Do not leave the
door only partially open. Do not leave the appliance unattended with the door fully open as this
could present a trip hazard.
If the dishwasher is not going to be used for a period of time, please disconnect the dishwasher from
the mains supply and switch off the water supply.
Do not leave the appliance unattended with the door fully open as this could present a trip hazard.
At the End of a Programme
At the end of the programme, the dishwasher will beep and the end of program indicator will turn on.
Switching off the Dishwasher
To save energy, please remember to switch the dishwasher off using the On/Off Mode button. The
dishwasher will continue to use a small amount of electricity in the Off mode. To use no electricity remove
the mains plug from the mains supply.
Unloading the Dishwasher
Allowing dishes to cool down before unloading is important because dishes tend to break and chip more
easily when they are hot. Allow the items to cool before unloading.
Delay Start
The starting time of a washing programme can be delayed and adjusted. Please follow the steps below.
1. Open the dishwasher door and load your soiled dishes and crockery.
2. Press the On/Off Mode button to turn on the dishwasher.
3. Select your preferred programme.
4. Press the Delay Start button.
5. Set the required delay start time using the Delay Start button.
Each press of this button increases the delay start time by 1 hour increments.
We suggest:
Unload the lower basket first, followed by the cutlery basket and then the upper basket. This will prevent
water drops from the upper basket from falling on to the dishes in the lower basket.
6. Close the door. The unit will start the programme at the assigned time automatically.
SDW60B12_IB_120522_Funnel Image_Pauline.indd 22 12年5月22日 下午10:36