16
GB
Bluetooth® Operation
The unit has a Bluetooth function that can receive a signal within 10 metres.
Pair the unit with a Bluetooth device to listen to music:
1.
While in the ON mode, press SOURCE Button repeatedly to select
Bluetooth mode. The Bluetooth indicator will light up blue. The
Bluetooth Pairing Indicator will flash red and blue. You will hear
“Bluetooth pairing”.
2.
Activate your Bluetooth device and select the search mode.
3.
“SANDSP20M” will appear on your Bluetooth device.
4.
Select “SANDSP20M” and enter “0000” for the password if necessary.
5.
The Bluetooth Pairing Indicator will illuminate blue when
connection successful. You will hear “Bluetooth connected”
6.
To disconnect the Bluetooth function, switch to another function on
the unit or disable the function from your Bluetooth device.
-OR-
Press and hold the Play button for about 5 seconds to clear all
pairing settings. The unit will search for any available Bluetooth
enabled devices. Repeat the steps above for pairing.
• If the signal strength is weak, your Bluetooth receiver may disconnect, but it
will re-enter pairing mode automatically.
• For better signal reception, remove any obstacles between the unit and the
Bluetooth device.
• This unit supports A2DP (Advanced Audio Distribution Profile) and AVRCP
(Audio Video remote Control Profile) functions. This can only be paired with
one Bluetooth device at one time.
• Compatibility with all devices and media types is not guaranteed.
• Some mobile phones with the Bluetooth function may connect and
disconnect as you make and end calls. This is not an indication of a problem
with your unit.
SANDSP20M_IB_140929_will.indb 16
29/9/14 4:09 PM
