GB
27
General Operation
Adjusting the Louvre
You can adjust the louvre to the desired position manually.
• Ensure the louvre is fully opened during operation.
• Do not put objects or hands into the louvre opening.
Setting the Auto On/Off Time
You can set the unit’s auto on/off time from the remote control only.
1. Press TIMER ON repeatedly to select the auto on time. To confirm, stop pressing and wait for
the confirmation tone.
2. Press TIMER OFF repeatedly to select the auto off time. To confirm, stop pressing and wait for
the confirmation tone. Both ON/OFF LEDs will light up. The unit is now programmed to auto
on/off.
To change the auto on/off time setting, repeat from step 1.
To cancel the auto on/off time setting, set the timer to 0.0.
Using the Dry Mode
For the best dehumidifying effect, keep all windows and doors
closed.
1. Remove the drain outlet plug from the back of the unit.
2. Connect one end of the drain tube to the drain outlet
opening and the other end to your drain area.
3. Press MODE and select “Dry” to start drying.
To stop drying, press MODE to switch to other modes or
switch off the unit. Make sure all water is drained before
removing the drain tube and replacing the drain outlet plug
onto the back of the unit.
• Fan speed and temperature cannot be adjusted under dry mode.
• Dry mode shall only be used in room temperature (13 °C - 35 °C).
• Remove the exhaust hose from the unit, otherwise room temperature may drop
during dehumidifying.
Using the Fan Mode
1. Press MODE and select “Fan”. The unit will operate the auto fan speed automatically.
2. Press FAN SPEED button on the remote control to select “Low”, “High“ or “Auto” fan speed.
Fan speed can only be adjusted from the remote control. Auto fan speed is selected
when the pointer on the remote control display has disappeared.
Using the Cool Mode
1. Press MODE button and select “Cool”. The unit will operate the auto fan speed automatically.
2. Press +/– on the unit or TEMP on the remote control to select the temperature.
3. Press FAN SPEED button on the remote control to select the fan speed.
Fan speed can only be adjusted from the remote control.
SAC05C19E_IB_5L_Final191128V2.indd 27
29/11/2019 15:38
