Sandstrom S814WMB13, Instruction Manual, Page: 19 / 24

4. Remove any lint and debris before carefully replacing the filter.
5. Turn the filter clockwise and screw the filter back. Return the hose and hose cap to their original places.
6. Close the service flap.
Cleaning the Water Inlet Filter
Clean the filter when water leaks from the water inlet.
1. Pull the power plug out before cleaning it.
2. Turn off the water supply to the washer and separate the inlet hose.
3. Remove the dirt from the inlet hose’s wire filter with a brush.
1. Use a small, flat bladed screwdriver to open the Service Flap.
2. Carefully loosen the drain filter. Turn anti clockwise until the water gentle begins to run, this is normal.
3. Remove the filter once the water has stopped (turn anti clockwise to loosen and remove).
Cleaning the Drain Filter
Before cleaning the drain filter, start the Drain programme, then switch off and unplug the washing
machine.
Service Flap
19