1
Unpacking
3
Charging the Battery
2
Removing the Insulating Strip from the Remote Control
5
Basic DVD Playback
4
Power Supply
Quick Start Guide
GB
S73PD11E / S73PDP11E
7” Portable DVD Player
Thank you
for purchasing your new Sandstr
Ø
m 7” Portable DVD Player.
Please follow this quick start guide for a successful first time set up.
We recommend that you spend some time reading the instruction manual in order to fully
understand all the operational features it offers.
Read all the safety instructions carefully before use and keep the instruction manual for
future reference.
Battery Operation time from fully charged battery = Approx. 3 hours
DVD Player
Remote Control
(with battery)
Mains Adapter
Car Power Adapter
Carry Bag
Remove all packaging from the unit. Retain the packaging.
If you dispose of it please do so according to any local regulations.
Instruction Manual
Quick Start Guide
S73PD11E
S73PDP11E
Remove the insulating mylar strip from the battery if the battery is
being used for the first time. It is located at the bottom backside of
the remote control.
1. Slide the ON/OFF switch to the
ON position.
2. Press the OPEN switch to open
the disc cover.
3. Hold the disc by its sides and
carefully place onto the disc
holder with the label side facing
up.
Gently push the disc down until
you hear a “click” sound.
4. Close the disc cover. The unit
starts playback if the disc does not
have any menus recorded on it.
If the disc has one or more titles recorded on it, a menu screen will
appear on the screen.
5. To play a title, press the / 0-9 buttons on the remote
control to highlight the title and then press the button on the
unit or the remote control.
You will find that there are many exciting features available.
To get to know all these features, please take some time to read
the instruction manual provided.
Tip:
QSG-S73PD_PDP11E-130606V3
REPEAT/
PROG
REPEAT
A-B
SETUP
GOTO
MENU/
ZOOM
STOP/
SLOW
ENTER
POWER
DISPLAY
AUDIO/
ANGLE
SUBTITLE/
TITLE
SOURCE
MUTE
VOL+
VOL–
REPEAT/
PROG
REPEAT
A-B
SETUP
GOTO
MENU/
ZOOM
STOP/
SLOW
ENTER
POWER
DISPLAY
AUDIO/
ANGLE
SUBTITLE/
TITLE
SOURCE
MUTE
VOL+
VOL–
3.5mm to
RCA AV Cable
1. Connect the mains adapter to DC IN socket on the unit then connect
the mains adapter to the mains socket.
• The LED indicator lights up red indicating that the battery is in
charging mode. When the battery is charged to full capacity, the
LED indicator goes green.
2. Remove the mains adapter. The battery is now fully charged and the
unit is ready to use.
Power adaptor
Right side of the DVD Player
To the mains socket
Mains Adapter (included)
Power adaptor
OPEN
Right side of the DVD Player
Right side of the DVD Player
To Cigarette
Lighter Socket
Car Power Adapter (included)
Using the Mains Adapter
(for indoor use)
To the mains
socket
Using the Car Power Adapter
(for in-car use)
S73PD_PDP11E_QSG_5L_130606-P1_Michelle.pdf 1 6/6/13 4:25 PM
