41
GB
Clock Setting
When the microwave is connected to the mains power, the LED display will show ”0:00” and
the microwave will beep. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the (1) button twice, the hour
digits will flash.
2. Turn the Timer/Weight/Auto Menu (2) dial
to adjust the hour digits. The input time
should be within 0-23.
3. Press the (1) button, the minute digits
will flash.
4. Turn the Timer/Weight/Auto Menu (2) dial
to adjust the minute digits. The input time
should be within 0-59.
5. Press the (1) button to finish clock
setting. “:” will start flashing and the time
will illuminate.
•
This is a 24-hour clock. When the microwave
is connected to the mains power for the first
time or when the power is resumed after a
power interruption, the LED display will show
“0:00”. To re-set the clock, simply follow the
above 5 steps.
•
In the process of clock setting, if there is no
operation within 1 minute, the microwave will
go back to the previous status automatically.
•
To find out the current time while the
microwave is operating, press the
(1)
button. It will display the current time for 3
seconds and then return to its original display.
1
2
S20BIG15E_5L_IB_160914_will.indb 41
14/9/2016 11:33 AM